Gold Garage Door Repair

Commercial Gate Repair in Los Angeles

Commercial gate stuck, off-track, or the operator down? Gold Garage Door repairs commercial and property-access gates across LA, 24/7, with fast diagnosis and minimal downtime.

5.0 Rating
150+ Google reviews
Same-Day Service
Minimal business downtime
Licensed & Insured
Certified gate technicians
24/7 Emergency
Locked in or out? Call.
Technician servicing a commercial gate operator at a Los Angeles property
Commercial Gate Repair · Los Angeles

What commercial gate repair covers

Commercial gate repair restores a business or property gate that has stopped working correctly. It covers the operator or motor, the drive chain or rack, the tracks and rollers, the safety sensors, the hinges, and the access controls.

Gold Garage Door diagnoses and repairs sliding, swing, and roll-up commercial gates across Los Angeles. For a storefront, warehouse, apartment, or parking entrance, a dead gate is a security and access problem, so we run same-day, 24/7 service to get it moving again.

Book a Repair
What we fix

Common commercial gate problems we repair

Most commercial gate failures come down to one of these six. We diagnose the real cause, then repair or replace the part.

Track & roller damage

Sliding gates jump the track or bind when rollers wear out or debris and rust build up in the V-track. We realign and replace.

Motor & operator failure

Worn gears, a failing capacitor, or a dead backup battery can stop the operator. We repair or replace the unit.

Safety sensor faults

Blocked or misaligned photo-eye sensors stop a gate from closing or cause it to reverse. We clean and realign them.

Chain & drive wear

Grinding noises usually mean a dry chain, worn drive components, or debris in the system. We service and re-tension the drive.

Sagging & hinge wear

Heavy swing gates sag over time and stress their hinges and posts. We re-weld, reinforce, and re-hang so they swing true.

Control board & power

A bad control board, a tripped breaker, or a failed battery backup can kill the gate. We test the circuit and restore power.

Planning a new install or a full replacement? See our commercial gate repair & installation services.

Why won't it open?

How we diagnose a commercial gate that won't move

A clear sequence, so we fix the actual fault instead of swapping parts and hoping.

  1. 1
    Check power and the control board. We confirm the operator has power, the breaker is set, and the board and battery backup are healthy.
  2. 2
    Check the release and locks. We make sure the manual release wasn't left disengaged and no lock is holding the gate.
  3. 3
    Inspect the drive and track. We look at the chain or rack, rollers, and track for wear, debris, or a gate that has jumped its guide.
  4. 4
    Test sensors, then cycle the gate. We realign the photo eyes, run the gate open and closed, and confirm the remotes and keypad work end to end.

Open for business, on time

A gate that won't open shouldn't shut you down

24/7 commercial gate repair across Los Angeles and the San Fernando Valley.

Get a Free Estimate
All-O-Matic C.H.I. Unique Garage Doors Elegant Doors Heritage Garage Door 1st United Door Amarr Entrematic Wayne Dalton Chamberlain American Spring FAAC Ramset DG / AIDI

What LA property owners say

"Elad is kind, caring and knows what he is doing. I received a few estimates for 3 gates I needed installed…"

— Donna Nelson ★★★★★ Google Review

"The severe winds of January buckled my gate. I called Gold Garage Door and the owner Elad…"

— Mark Hamilton ★★★★★ Google Review

"I wanted to replace our old swing gate and randomly met Elad of Gold Garage Doors. What a great find!…"

— Larry Levin ★★★★★ Google Review

FAQs

Commercial gate repair questions, answered

What are the most common commercial gate problems?

The frequent ones are track and roller damage on sliding gates, motor or operator failure, misaligned safety sensors, sagging or worn hinges on swing gates, chain and drive wear, and control-board or power faults.

Why won't my commercial gate open or close?

Usually a power or control-board issue, a manual release left disengaged, debris or wear in the track and drive, a misaligned photo-eye sensor, or a failing operator. We work through each to find the real cause.

Do you repair sliding, swing, and roll-up commercial gates?

Yes. We service all three, along with their operators, drive systems, tracks and rollers, hinges, sensors, remotes, keypads, and access controls.

How much does commercial gate repair cost?

It depends on the gate type and the fault, so every job is quoted after an on-site inspection. Contact us for a free, no-obligation quote before any work begins.

Do you offer 24/7 emergency commercial gate repair?

Yes. A stuck or stuck-open gate is a security and access risk for a business, so we run around-the-clock emergency service across Los Angeles with same-day response in most cases.

How long does a commercial gate operator last?

A well-maintained commercial operator typically lasts 10 to 20 years, depending on the duty cycle, weather exposure, and how regularly it is serviced.

Commercial gate down? Let's get it moving.

Same-day, 24/7 commercial gate repair across Los Angeles and the San Fernando Valley.