Gold Garage Door Repair · Los Angeles

Sliding Gate Repair in Los Angeles

Sliding gate off its track, grinding, or stuck halfway? Gold Garage Door repairs tracks, rollers, guides and drive hardware on sliding gates across Los Angeles, same-day and 24/7.

5.0 Rating
150+ Google reviews
Same-Day Service
Answered 24/7
Licensed & Insured
Certified technicians
Local to the Valley
Fast response times
Technician repairing the roller and ground track of a sliding driveway gate in Los Angeles
Sliding Gate Repair · Los Angeles

What sliding gate repair covers

Sliding gate repair is the mechanical work that lets a gate roll straight and stay upright: the ground track, the rollers that carry the weight, the guide rollers that hold the top of the gate, and the chain or gear rack that connects it to the motor.

When one of those wears out, the gate drags, grinds, stops short or leaves the track. Gold Garage Door finds the part that failed, fixes it, and checks the rest of the gate so the same problem does not come back in a few weeks.

Book a Repair
Signs your sliding gate needs repair

Common sliding gate problems we fix

If your gate is doing any of these, stop running the opener and call. Forcing it usually makes the repair bigger.

Gate off its track

A wheel has jumped the track or the gate has left its guides. We reset it safely and fix what let it jump.

Worn or seized rollers

Flat-spotted, rusted or seized rollers make the gate heavy and loud. We replace them and check the track they run on.

Bent or blocked track

Tracks bend under vehicle weight and fill with gravel and leaves. We clear, straighten or replace the damaged section.

Loose chain or gear rack

A sagging chain or misaligned rack makes the gate jerk, skip or stop short. We re-tension and realign the drive.

Worn guide rollers

The rollers at the top of the gate keep it upright. When they wear, the gate leans, rubs and can tip.

Gate reverses or stops halfway

Drag from the track can trip the operator's safety reverse. If the fault is electrical, see gate opener repair.

Know your gate

Ground-track vs. cantilever sliding gates

Both slide sideways, but they carry their weight differently, so they wear and fail in different places.

Ground-track gates

The gate rolls on grooved wheels along a steel track fixed to the driveway. This is the most common setup on LA homes. Watch for debris in the track, worn wheels and track sections that lift or bend where cars cross.

Cantilever gates

The gate hangs from rollers mounted on posts and never touches the ground. There is no track to clog, which suits uneven or sloped driveways. Watch for worn roller bearings and posts that have shifted out of line.

Chain or gear rack drive

Either gate type is moved by a chain or a toothed rack along the gate. A loose chain or a rack that has dropped out of mesh makes the gate jerk, skip or stop short.

Deciding between gate styles? Read sliding vs. swing gates.

Technician realigning the wheel of a sliding gate that came off its ground track
Gate off its track?

What to do if your sliding gate comes off its track

Stop using the remote. Running the motor against a derailed gate can bend the track, strip the drive and burn out the operator.

Do not pull the manual release or push the gate if it is leaning or out of its top guides. A heavy gate with nothing holding it upright can fall. Keep kids, pets and cars away from it.

Call us. We secure the gate, set it back on the track, and find what let it jump, usually a worn roller, a bent track section or a missing stop.

Call Now
How a visit works

How we repair a sliding gate

We check the whole gate end to end, so you are not paying for rollers when the track was the real problem.

  1. 1
    Make it safe. A leaning or derailed gate is secured before anything else.
  2. 2
    Check the track end to end. We look for bends, lifted sections, cracked concrete and debris, and check that the track is level.
  3. 3
    Inspect rollers and guides. Ground rollers and upper guide rollers are checked for wear and replaced as needed.
  4. 4
    Set the drive. Chain tension or gear rack alignment is adjusted so the gate moves smoothly.
  5. 5
    Cycle and test. We run the gate through full open and close cycles and confirm the safety reverse works.
Technician checking a slide gate operator after repairing the track and rollers
Gate and motor work together

A dragging gate wears out the motor

A sliding gate operator is sized to move a gate that rolls freely. When rollers seize or the track binds, the motor works harder on every cycle, runs hot and fails early.

That is why we check how the gate rolls by hand before we look at the motor. Fixing the drag often fixes the opener problem too.

If the operator itself has failed, see gate opener and motor repair. For business and multi-tenant properties, see commercial gate repair.

Stuck open? Stuck shut?

A sliding gate that won't move leaves your property open or your car trapped.

Same-day sliding gate repair across Los Angeles and the San Fernando Valley, 24/7.

All-O-Matic C.H.I. Unique Garage Doors Elegant Doors Heritage Garage Door 1st United Door Amarr Entrematic Wayne Dalton Chamberlain American Spring FAAC Ramset DG / AIDI
Why Gold Garage Door

Why LA calls Gold for sliding gates

Gate and Opener, One Team

We repair the track, rollers and the operator, so you are not juggling two companies.

24/7 Service

A real person answers any hour, and we dispatch the same day.

Licensed & Insured

Certified technicians for residential and commercial gates across LA.

Find the Real Cause

We check the track, rollers and guides, not just the part that looks broken.

Upfront Quote

Every job is quoted after inspection, and you approve it before we start.

Tested Before We Leave

Full open and close cycles and the safety reverse, all checked.

What LA property owners say

"The severe winds of January 6th and 7th buckled my gate. I called Gold Garage Door and the owner Elad showed…"

— Mark Hamilton ★★★★★ Google Review

"Elad is kind, caring and knows what he is doing. I received a few estimates for 3 gates I needed installed at…"

— Donna Nelson ★★★★★ Google Review

"Very prompt service and good communication! Looks great and is exactly the upgrade we needed."

— Jessica Brandin ★★★★★ Google Review

FAQs

Sliding gate repair questions, answered

What are the most common problems with sliding gates?

A gate that has come off its track, worn or seized rollers, a bent or debris-filled track, a loose chain or misaligned gear rack, worn upper guide rollers, and an operator that strains because the gate is dragging. Most sliding gate calls trace back to the track and rollers, not the motor.

Why is my sliding gate hard to push or coming off its track?

Usually worn rollers, a track that has bent, lifted or filled with gravel and leaves, or a guide roller that has come loose at the top of the gate. A gate that feels heavy by hand is telling you something is dragging, and the opener will be fighting that same drag.

How do I open a sliding gate manually?

Most operators have a manual release, a keyed lever or handle on the motor housing. Once released, the gate should roll by hand. If the gate is leaning, off its track or out of its top guides, do not release it or push it. Keep people and cars clear and call us.

Is it safe to keep using a sliding gate that is grinding or off its track?

No. A grinding gate is wearing out its rollers, track and motor with every cycle, and a gate that has left its track or guides can tip. Stop using the opener and have it inspected before it turns into a bigger repair.

Do you repair the gate or just the motor?

Both. This page covers the gate itself: track, rollers, guides, chain and rack. If the operator, control board or remote is the problem, our gate opener repair service handles it, often on the same visit.

Can you repair my sliding gate the same day?

In most cases, yes. We answer 24/7 and carry common rollers, guides, chain and hardware on the truck. If a part has to be ordered or fabricated, we make the gate safe and secure first.

What is the difference between a sliding gate and a cantilever gate?

A standard sliding gate rolls on wheels along a track set in the driveway. A cantilever gate hangs from rollers mounted on posts and never touches the ground, so there is no ground track to clog. Both slide sideways, but they wear and fail in different places.

How much does sliding gate repair cost in Los Angeles?

It depends on the gate's size and weight and on what failed, so every job is quoted after inspection. Contact us for a quote, and you approve it before any work begins.

Where we work

Sliding gate repair across Los Angeles

We repair sliding gates across LA and the Valley. Local pages: Encino, Woodland Hills and North Hollywood.

Los AngelesNorth HollywoodValley VillageStudio CitySherman OaksEncinoTarzanaWoodland HillsVan NuysBurbankGlendaleToluca Lake

Sliding gate trouble? Let's get it rolling.

Same-day, 24/7 sliding gate repair across Los Angeles and the San Fernando Valley.