Gold Garage Door Repair · Los Angeles
Swing Gate Repair in Los Angeles
Swing gate sagging, dragging on the driveway or not latching? Gold Garage Door repairs hinges, frames, latches and gate arms on swing gates across Los Angeles, same-day and 24/7.
150+ Google reviews
Answered 24/7
Certified technicians
Fast response times
What swing gate repair covers
A swing gate hangs its whole weight on a few hinges and one post. Swing gate repair is the work that keeps it hanging true: the hinges, the post and its anchor points, the gate frame, and the latch, stop and drop rod that hold it closed.
When any of those wears or moves, the gate drops, drags on the driveway, stops meeting in the middle or will not latch. Gold Garage Door finds what moved, corrects it, and re-hangs the gate so it swings freely again.
Book a Repair →Common swing gate problems we fix
Swing gates rarely fail all at once. They give you these warnings first.
Sagging or dropped gate
The latch side sits lower than it used to. We find whether the hinges, post or frame moved and correct it.
Gate drags on the driveway
Scrape marks on the concrete mean the gate has dropped or the driveway slope needs different hinges.
Worn or seized hinges
Squealing, stiff or loose hinges are replaced or re-set, and matched to the gate's weight.
Leaves that don't meet
On double gates, one leaf sits high or the gap is uneven. We re-hang and align both leaves.
Latch, lock or drop rod won't line up
When the gate moves, the latch misses. We realign the gate first, then the hardware.
Arm operator straining
A gate that swings hard makes the motor work harder and fail early. See gate opener repair.
What makes a swing gate sag
Sagging has four usual causes, and the right repair depends on which one you have.
Hinge wear
Hinge pins and bearings wear from years of carrying the gate. Play in the hinge shows up as a drop at the latch side.
Post movement
A hinge post that leans even slightly moves the far end of the gate a lot. Soil movement, roots and vehicle bumps are common causes.
Frame out of square
The gate frame itself can rack into a diamond shape, especially on wide or wood-clad gates without a diagonal brace.
Loose anchor points
Hinge brackets can crack at the weld or pull away from a masonry pillar, letting the gate shift every time it swings.
Comparing gate styles for a replacement? Read sliding vs. swing gates.
A sagging gate wears out the opener
A swing gate operator is set up for a gate that moves freely through its whole arc. When the gate sags or binds, the arm pushes against that drag on every cycle, and the motor, gears and mounting brackets pay for it.
We check how the gate swings by hand before we touch the operator. Often the gate is the real problem and the opener is only the part that complained.
For motors, control boards and remotes, see gate opener and motor repair. For business and multi-tenant properties, see commercial gate repair.
How we repair a swing gate
A sagging gate is a symptom. This is how we get to the cause.
- 1Check the post. We check the hinge post for lean and the anchor points for cracks or movement.
- 2Inspect the hinges. Each hinge is checked for wear and play, and replaced or re-set as needed.
- 3Square the frame. The gate is checked for square and braced or repaired if it has racked.
- 4Re-hang and align. The gate is set to clear the driveway and meet the latch, stop or second leaf.
- 5Test the full swing. We cycle the gate, check the latch and drop rod, and on automatic gates confirm the arm, limits and safety reverse.
Won't close? Won't latch?
A swing gate that drags or hangs open leaves your property exposed.
Same-day swing gate repair across Los Angeles and the San Fernando Valley, 24/7.
Why LA calls Gold for swing gates
Gate and Opener, One Team
We repair the hinges and frame and the operator, so you are not juggling two companies.
24/7 Service
A real person answers any hour, and we dispatch the same day.
Licensed & Insured
Certified technicians for residential and commercial gates across LA.
Find the Real Cause
Hinge, post, frame or anchor: we tell you which one moved.
Upfront Quote
Every job is quoted after inspection, and you approve it before we start.
Tested Before We Leave
Full swing, latch and safety reverse, all checked.
What LA property owners say
"I wanted to replace our old swing gate and randomly met Elad of Gold Garage Doors. What a great find!…"
— Larry Levin ★★★★★ Google Review
"The severe winds of January 6th and 7th buckled my gate. I called Gold Garage Door and the owner Elad showed…"
— Mark Hamilton ★★★★★ Google Review
"Elad is kind, caring and knows what he is doing. I received a few estimates for 3 gates I needed installed at…"
— Donna Nelson ★★★★★ Google Review
Swing gate repair questions, answered
What causes a swing gate to sag?
Worn hinges are the most common cause. The others are a hinge post that has started to lean, a gate frame that has gone out of square, and loose or pulled anchor points where the hinges attach. Heavy gates and long gate leaves put the most load on their hinges.
What is the best way to fix a sagging gate?
Fix the cause, not the symptom. That means replacing or re-setting worn hinges, squaring and bracing the frame, and correcting the post if it has moved. Adding a wheel or shimming the latch only hides the problem for a while.
How do you lift a gate that has dropped?
The gate is supported, the hinges are adjusted or replaced, and the leaf is re-hung so it clears the driveway and lines up with the latch or the other leaf. If the post has leaned, the post has to be dealt with first or the gate will drop again.
Is my swing gate manual or automatic, and does it matter?
It matters for the repair. A manual gate only needs hinges, frame, latch and drop rod working properly. An automatic gate also has an arm or underground operator that depends on the gate swinging freely, so a sagging gate will strain and wear out the motor.
Why does my swing gate not close all the way?
Usually the gate has dropped and is catching the ground or missing the latch, the stop has moved, or the operator arm or its limits are out of adjustment. On automatic gates, a safety sensor fault can also stop it short.
Can a swing gate work on a sloped driveway?
Yes, with the right hardware. Rising hinges lift the gate as it opens so it clears an uphill driveway, and some gates are set to swing outward instead. If your gate scrapes on the slope, tell us when you call.
Do you repair swing gate openers too?
Yes. Arm operators, control boards, batteries and remotes are covered on our gate opener and motor repair page, and we can handle both on the same visit.
How much does swing gate repair cost in Los Angeles?
It depends on the gate's size, weight and material and on what failed, so every job is quoted after inspection. Contact us for a quote, and you approve it before any work begins.
Swing gate repair across Los Angeles
We repair swing gates across LA and the Valley. Local pages: Encino, Woodland Hills and North Hollywood.
Swing gate sagging? Let's hang it right.
Same-day, 24/7 swing gate repair across Los Angeles and the San Fernando Valley.